Hot Selling Non Rechargeable Flashlight Super Bright Flashlight Tactical Emergency Flashlight

Basic Info

Model NO.	HG-YS-30
Weigh	140g
Transport Package	Standard Export Package
Specification	118(L)*40(W)*40(H)
Trademark	higreater
Origin	China
Production Capacity	100000pieces/Month

Product Description

Basic Info.

Material	ABS	Batterry Type	Magnesium Air battery
Transport Package	Standard Export Package	Specification	118mm*40mm*40mm
Trademark	Higreater	Origin	China
Production Capacity	100000piece/Month

Battery Advantages:1) Super endurance After activation, it can be continuously illuminated for more than 100 h, with 50% more endurance than common flashlight, meeting the needs of outdoor activities, field search and rescue, outdoor work, patrol, emergency repair and maintenance, etc.2) SimplicityAdd water to activate . use water, Water is not limited to tap water, river water, sea water, tea, urine, saliva, cola, beer, etc.3) Very safeportable, land transportation, air transportation and sea transportation are all available, no need to consider the risk of storage, transportation. No risk of ignition and explosion, not afraid of high temperature, puncture, does not contain any toxic and harmful substances, friendly to human body and environment.4)Long storage
Vacuum packaging, storage life of more than 10 years,maintenance free during storage, energy does not reduce, the product as good as new.5)Multi-function4 working modes :high light, low light, flash, SOS.
6)High brightnessThe maximum brightness can reach 1000Lm, to meet the lighting requirements.7)Portability
The product is light in weight, small in size, smaller than thecommon flashlight, easy to carry.
Application Scenarios:

Use direction:

1) Prepare 700ml of brine (about 10% concentration);
2) Open the latch, lift the upper cover of the battery, and confirm that the integrated plug is inserted in place, and the power supply is fast
The plug is connected;
3) Unscrew 6 vent valves, inject liquid into 6 battery cavities respectively, and add liquid to It can be done without passing the metal plate (about 110ml for each monomer);
4) Close the upper cover of the battery, fasten the lock, press the power supply button, the power display lamp will display normally, and the battery activation is completed.
5) The battery is used for about 4h, and the liquid needs to be replaced;6) Press the button to cut off the power supply, open the upper cover of the battery, pull out the power quick plug, and remove lower the upper cover of the battery;7) Pull out the integrated plug, and then pull up the upper cover of the battery inner core from both sides of the battery inner core;8) Dump the waste liquid and flush it.
9) Replace the components in turn, repeat the battery activation mode in 3.1, and complete the liquid change operation.

Patent certificates

Product professional test